Throttle Position (TP) Sensor

WARNING: This page is about a different variant/trim than selected.

NOTE: For information on connector terminal identification and test conditions specified in the following tables, see ADJUSTMENTS - 2.0L article.

TP SENSOR RESISTANCE

Test Condition ⁽¹⁾

⁽²⁾ Ohms

Between Terminals "A" & "C"

4000-6000

⁽¹⁾	With throttle closed.

⁽²⁾	See Fig 1 .

Fig 1: Identifying TP Sensor Connector Terminals

Courtesy of MAZDA MOTORS CORP.

TP SENSOR VOLTAGE

ECM/PCM ⁽¹⁾ Wire Color

Closed Throttle Volts

Wide Open Throttle Volts

2.0L A/T

Pink/Blue (89)

.3-0.7

3.4-5.3

2.0L M/T

Pink/Green (3F)

.3-0.7

3.4-5.3

⁽¹⁾	Measure voltage between ground and ECM/PCM terminal No. in parentheses.