LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> B3000 SX, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Controls Trouble Shooting (1 Of 5) >> Electronic Engine Control (EEC) System >> Intermittent Diagnostic Techniques >> Re-Creating The Fault
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Re-Creating The Fault

Re-creating the fault is the first step in isolating the cause of the intermittent symptom. A thorough investigation should start with the customer information worksheet located in the Introduction. If freeze frame data is available, it may help in re-creating the conditions at the time of a MIL DTC. Listed below are some of the conditions for re-creating the fault:

CONDITIONS TO RE-CREATE FAULT REFERENCE

Engine Type Conditions Non-Engine Type Conditions
Engine Temperature Ambient Temperature
Engine rpm Moisture Conditions
Engine Load Road Conditions (smooth-bumpy)
Engine idle/accel/decel  
scientia non olet · About LEMON Manuals