LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> B3000 SX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 388 (Starting System) >> Starter Removal/Installation >> L3
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Starter Removal/Installation: L3

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION [L3] .)
  3. Remove the under cover.
  4. Remove the clutch release cylinder. (See CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION .)
  5. Remove in the order indicated in Fig 1.
  6. Install in the reverse order of removal.
    Fig 1: Starter (L3) With Torque Specifications
    G03644075Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals