Crankshaft Position Sensor Resistance
WARNING: This page is about a different car, the 1997 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect crankshaft position sensor connector. Using ohmmeter, measure resistance between terminals "A" and "B". See Fig 1 . Resistance should be as specified. Refer to the CRANKSHAFT POSITION SENSOR RESISTANCE table. If resistance is not as specified, replace crankshaft position sensor.
CRANKSHAFT POSITION SENSOR RESISTANCE
| Application | Ohms@ 68°F (20°C) |
|---|---|
| Millenia 2.3L | 950-1250 |