Throttle Position (TP) Sensor

WARNING: This page is about a different car, the 1997 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For information on connector terminal identification and test conditions specified in the following tables, see ADJUSTMENTS - 2.3L article.

TP SENSOR CONTINUITY

Condition ⁽¹⁾

Continuity Between Terminals "C" & "D"

.008" (.19 mm)

Yes

.015" (.37 mm)

⁽¹⁾	Insert feeler gauge of specified thickness between throttle lever and throttle stop screw.

TP SENSOR VOLTAGE

ECM/PCM Wire Color ⁽¹⁾

Closed Throttle Volts

WOT Volts

Yellow (3B)

.1-1.1

2.8-4.5

⁽¹⁾	Measure voltage between ground and ECM/PCM terminal No. in parentheses.