Not Reusing Windshield

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the base. (See BASE REMOVAL .)
NOTE:
- For the areas of the sealant that are difficult to cut, use a SST (piano wire) and follow the procedure under "Reusing Windshield".
Use a tool like that shown in the figure, and insert the blade into the sealant.
Pull through the sealant around the edge of the glass.
Remove the glass.

Fig 1: Inserting Blade Into Sealant Using Tool
Courtesy of MAZDA MOTORS CORP.