Connector Identification
WARNING: This page is about a different car, the 1997 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
Harness connector terminal identification illustrations are generic and categorized by number of terminals. For terminal identification of connectors with 1 or 2 terminals, see WIRING DIAGRAMS - 2.3L article. All connector views are terminal side unless otherwise specified. For harness connector terminal identification, see HARNESS CONNECTOR IDENTIFICATION DIRECTORY .
HARNESS CONNECTOR IDENTIFICATION DIRECTORY
| Description | See Figure | |||
|---|---|---|---|---|
| 2.3L | ||||
| Camshaft Position Sensor | Fig 5 | |||
| Crankshaft Position Sensor | Fig 2 | |||
| EGR Valve Position Sensor | Fig 1 | |||
| Engine Control Module (1) | Fig 10 | |||
| Fuel Gauge Sending Unit | Fig 1 | |||
| Fuel Tank Pressure Sensor | Fig 1 | |||
| Left Front Heated Oxygen Sensor | Fig 1 | |||
| Left Rear Heated Oxygen Sensor | Fig 4 | |||
| Intake Air Temperature Sensor | Fig 6 | |||
| Manifold Absolute Pressure Sensor | Fig 1 | |||
| Mass Air Flow Sensor | Fig 1 | |||
| Right Front Heated Oxygen Sensor | Fig 2 | |||
| Right Rear Heated Oxygen Sensor | Fig 4 | |||
| Throttle Position Sensor | Fig 5 | |||
| Transmission Control Module | Fig 11 | |||
| 2.5L | ||||
| Crankshaft Position Sensor | Fig 2 | |||
| Distributor | Fig 6 | |||
| EGR Boost Sensor | Fig 2 | |||
| EGR Valve Position Sensor | Fig 1 | |||
| Fuel Gauge Sending Unit | Fig 1 | |||
| Fuel Tank Pressure Sensor | Fig 1 | |||
| Left Front Heated Oxygen Sensor | Fig 4 | |||
| Mass Air Flow Sensor | Fig 1 | |||
| Middle Heated Oxygen Sensor | Fig 3 | |||
| Powertrain Control Module (1) | Fig 12 | |||
| Rear Heated Oxygen Sensor | Fig 3 | |||
| Right Front Heated Oxygen Sensor | Fig 4 | |||
| Throttle Position Sensor | Fig 5 | |||
|
||||