Possible Causes
WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
Possible causes are:
- Connector or terminal malfunction
- Open circuit in White wire between main relay and VIS control solenoid valve 2-pin harness connector terminal "A"
- Open circuit in Green/Red wire between VIS control solenoid valve harness connector terminal "B" and PCM 30-pin harness connector terminal "4R"
- PCM malfunction
- Short to ground in Green/Red wire between VIS control solenoid valve harness connector terminal "B" and PCM 30-pin harness connector terminal "4R"
- VIS control solenoid valve malfunction