LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> 626 LX L4-2.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Normal Scan Data Values >> Using SST (NGS Tester)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Using SST (NGS Tester)

PCM Inspection Using SST (NGS Tester)

NOTE:
- PIDs for the following parts are not available on this model. Go to the appropriate part inspection.
- CMP sensor
- Main relay

1. Connect the NGS tester to the DLC-2.
2. Turn the ignition switch to ON position.
3. Select the "PID/DATA MONITOR AND RECORD" function on the NGS display and press TRIGGER.
4. Select the appropriate PID on the NGS display and press START.
5. Measure the PID valve.
- If PID valve is not within the specification, follow the instructions in Action column.




Part 1:




Part 2:




Part 3:




PID/DATA Monitor Table (Reference) - Part 1:




PID/DATA Monitor Table (Reference) - Part 2:




PID/DATA Monitor Table (Reference) - Part 3:




PID/DATA Monitor Table (Reference) - Part 4:




PID/DATA Monitor Table (Reference) - Part 5:




PID/DATA MONITOR Item table

NOTE: The following PIDs may be displayed on the NGS tester, but they are not used for inspection, because these devices are not applied to this model.

*1 : With immobilizer system
*2 : Without immobilizer system
scientia non olet · About LEMON Manuals