Retrieving Continuous DTCS
Turn ignition switch to LOCK position. Connect New Generation Star (NGS) tester to data link connector. Enter vehicle information on NGS tester. Select DIAGNOSTIC DATA LINK TEST, then select GEM - GENERIC ELECTRONIC MODULE on NGS tester. Enter appropriate vehicle options on NGS tester. After all vehicle options are selected, press SAVE key. Select DIAGNOSTIC TEST MODE. Select RETRIEVE/CLEAR CONTINUOUS DTCs. Record all DTCs. See GENERIC ELECTRONIC MODULE (GEM) DTC INDEX (PICKUP) or GENERIC ELECTRONIC MODULE (GEM) DTC INDEX (TRIBUTE)
table.
GENERIC ELECTRONIC MODULE (GEM) DTC INDEX (PICKUP)
| DTC |
Description |
Perform Test No. |
| B1342 |
GEM Defective |
|
| B1398 |
Power Window One-Touch Relay Circuit Failure |
2 & 4 |
| B1400 |
Power Window One-Touch Relay Coil Circuit Short To Power |
2 & 4 |
| B1404 |
Left Power Window Down Switch Input Circuit Failure |
2 |
| B1405 |
Left Power Window Down Switch Short Circuit To Power |
2 |
| B1410 |
Left Power Window Motor Circuit Failure |
2 |
GENERIC ELECTRONIC MODULE (GEM) DTC INDEX (TRIBUTE)
| DTC |
Description |
Perform Test No. |
| B1302 |
Accessory Delay Relay Coil Failure |
1 |
| B1304 |
Accessory Delay Relay Coil Circuit Open Or Short To Battery |
1 |