LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> B4000 SE, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock/Traction Control System >> Front Speed Sensor (4X4) Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front Speed Sensor (4X4) Removal/Installation

  1. Remove disc plate shield. For 2001 models refer to FRONT BRAKE ROTOR and for 2002 models refer to FRONT BRAKE ROTOR .
  2. Disconnect the front speed sensor connector and unclip the front speed sensor wire from the vehicle frame.
  3. Remove the bolt (1) and front speed sensor (2).
  4. Install in reverse order of removal.
  1. Tightening Torque 
    1. 7-9 N.m (71-92 kgf.cm, 63-79 in.lbf) 
    Fig 1: Removing/Installing Front Speed Sensor (4x4)
    G01166923Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals