General Specifications
| Cylinder Block | Bore Diameter | Class-1 | 84.800 - 84.810 Millimeter (mm) |
| Class-2 | 84.810 - 84.820 Millimeter (mm) | ||
| Class-3 | 84.820 - 84.830 Millimeter (mm) | ||
| Main Bearing Bores Inside Diameter Bearing Caps Installed | 58.011 - 58.0380 Millimeter (mm) | ||
| Bearing Caps Graded By Size | 58.008 - 58.031 Millimeter (mm) | ||
| Surface Finish (ra) Each Bore Min | 2.0 - 6.0 Micron (micron) | ||
| Out Of Round Limit | 0.025 Millimeter (mm) Max | ||
| Taper Limit | +0.025 - 0.013 Millimeter (mm) |