Crankshaft Main Bearing
| Main cap tightening torque | Step 1 | 25 Newton Meter (Nm) |
| Step 2 | Tighten 60 degrees | |
| Clearance | Standard caps | 0.011 - 0.058 Millimeter (mm) |
| Caps graded by size | 0.196 - 0.044 Millimeter (mm) | |
| Main bearing bores inside diameter bearing caps installed | Standard caps | 58.011 - 58.038 Millimeter (mm) |
| Caps graded by size | 58.008 - 58.031 Millimeter (mm) |