LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> 626 ES, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System >> Component Tests >> Keyless Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Keyless Control Module

  1. Remove rear package tray. Locate keyless control module behind rear seat, in trunk/hatch compartment. Leave keyless control module harness connector attached. Using DVOM, measure voltage at specified terminals of keyless control module connector (backprobe connector). See Fig 1 .
  2. Disconnect harness connector before checking continuity at terminal "B" (ground). If voltage measurements or continuity are not as specified, check related components and wiring harnesses. If items are okay, but system is still not functioning properly, replace keyless control module.
Fig 1: Keyless Control Module Circuit Testing/Connector Terminals
G98J04644Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals