LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> B3000 Base, 3.0 V, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Immobilizer Systems - Passive Anti-Theft Systems) >> Programming >> Key Programming (Spare Key Programming Switch)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Key Programming (Spare Key Programming Switch)

WARNING: This page is about a different car, the 2001 Mazda B4000, 2001 Mazda B3000, 2001 Mazda B2500, and 2001 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The spare key programming switch is a programmable switch which provides capability to enable/disable normal customer spare key programming procedure detailed in owner's manual. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want spare key programming procedure available to vehicle driver. Spare key programming switch state can be viewed using PATS PID SPARE_KY.

Insert a programmed ignition key into ignition lock cylinder. Turn ignition switch from OFF to RUN position. With NGS tester connected to vehicle, enter function test menu. Select SECURITY ACCESS PROCEDURE. This procedure will take 10 minutes to perform. After security access procedure has been completed, a new menu will be displayed with command options. Default setting on all new vehicles is ENABLE. Select SPARE KEY PROGRAMMING SWITCH. Set SPARE KEY PROGRAMMING SWITCH to ENABLE or DISABLE.

scientia non olet · About LEMON Manuals