LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> B4000 Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Column Switches >> Key Release Button Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Key Release Button Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the ignition switch lock cylinder; LOCK CYLINDER REMOVAL/INSTALLATION  .
  3. If equipped/remove the tilt wheel handle.
    Fig 1: Removing Tilt Wheel Handle
    G02673307Courtesy of MAZDA MOTORS CORP.
  4. Remove the upper and lower steering column shrouds.
    1. Remove screws.
    2. Remove shrouds.
    Fig 2: Removing Steering Column Shrouds
    G02673308Courtesy of MAZDA MOTORS CORP.
  5. Remove the key release lever bolt (1), lever (2) and spring (3).
    Fig 3: Removing Key Release Lever Bolt, Lever & Spring
    G02673309Courtesy of MAZDA MOTORS CORP.
  6. Install in reverse order of removal.
scientia non olet · About LEMON Manuals