LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting Systems >> DRL Control Module Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DRL Control Module Removal/Installation

NOTE:
  • Because the lock section of the control module is damaged easily, do not remove the control module from the bracket unless replacement is necessary. Always perform an inspection of the DRL control module before removal.
  1. Remove the negative battery cable.
  2. Remove the bracket.
  3. Disconnect the DRL control module connector.
  4. Remove the DRL control module by prying the lock section of the side part with a flathead screwdriver.
  5. Install in the reverse order of removal.
Fig 1: Removal DRL Control Module
G01196629Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals