LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> Protege5 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 496 (Glass/Windows/Mirrors) >> Power Window Main Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Main Switch Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Using a flathead screwdriver wrapped with protective tape, pry up the rear of the switch panel and detach the clip.
  3. Remove the switch panel from the front door trim keeping the tab from catching.
  4. Disconnect the power window main switch connector and the power mirror switch connector.
    Fig 1: Identifying Switch Panel
    G03703078Courtesy of MAZDA MOTORS CORP.
  5. Remove the screws, then remove the power window main switch.
  6. Install in the reverse order of removal.
    Fig 2: Removing Power Window Main Switch
    G03703079Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals