October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Vehicle Preparation

Connect scan tool to vehicle. Verify the following PIDs:

IAT PID 40-100°F (4-38°C)
FLI PID 50-75 percent.
ECT PID minimum of 170°F (77°C)

Without returning to key off, using scan tool, clear all DTCs. DTC P1000 will remain. Using scan tool, view status of OBD-II monitors. Proceed to OBD-II DRIVE CYCLE PROCEDURE if necessary or proceed to identified monitor drive cycle. See MONITOR REPAIR VERIFICATION DRIVE CYCLES .