LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> 6 s, Standard >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle - Overhaul (A65M-R) >> Primary Shaft Components Assembly >> 5TH Synchronizer Key Spring, 5TH Synchronizer Key And 5TH Clutch Hub And Sleeve Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

5TH Synchronizer Key Spring, 5TH Synchronizer Key And 5TH Clutch Hub And Sleeve Assembly Note

  1. Assemble the 5th synchronizer key springs, 5th synchronizer key and 5th clutch hub to the 5th clutch sleeve.
    1. Install a new 5th clutch hub in the direction as shown in the figure.
      Fig 1: Installing 5th Clutch Hub
      G01904260Courtesy of MAZDA MOTORS CORP.
    2. Install a new 5th clutch sleeve in the direction as shown in the figure.
      Fig 2: Installing 5th Clutch Sleeve
      G01904261Courtesy of MAZDA MOTORS CORP.
    3. Install center projection parts of 5th synchronizer key springs to different synchronizer keys on each side.
      Fig 3: Identifying Synchronizer Key Spring Center Projections
      G01904262Courtesy of MAZDA MOTORS CORP.