LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> 6 s, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Immobilizer System Reprogram Procedure >> Security Access Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security Access Procedure

NOTE:
  • When using the SST (WDS) to perform "Ignition Key Code Erase" or "Customer Spare Key Programming Enable/Disable", it is necessary to obtain security access approval.
  1. Connect the SST  (WDS).
  2. Select "Tool box", "Body", "Security", and then "PATS Functions" (in this order).
  3. The SST (WDS) will read out an outcode depending on the designated procedure.
    CAUTION:
    • After reading out the outcode, do not turn ignition switch from LOCK to ON position 5 times, otherwise the outcode value will be changed.
  4. Access Mazda incode that corresponds to the outcode.
  5. Input the incode to the SST  (WDS).
  6. Verify that the security access procedure finishes normally.
scientia non olet · About LEMON Manuals