LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> 6 s, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls [Self-Diagnostics 2.3L]) >> Diagnostic Tests >> DTC P2122: Accelerator Pedal Position Sensor No. 1 Circuit - Low Input >> Detection Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Detection Condition

WARNING: This page is about a different variant/trim than selected.

PCM monitors Accelerator Pedal Position (APP) sensor No. 1 signal at PCM 27-pin harness connector terminal "3D". If PCM detected APP sensor No. 1 voltage was less than 0.2 volt, PCM determines APP sensor No. 1 circuit has malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals