Key Programming - Spare Key Programming Switch: Notes
NOTE:
- The Spare Key Programming Switch is a WDS or equivalent programmable switch that provides the capability to enable/disable the Spare Key Programming Procedure. This procedure is in the Owner's Guide Spare Key Programming Procedure or see KEY PROGRAMMING - PROGRAM A KEY USING TWO PROGRAMMED KEYS . This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the Spare Key Programming procedure available to the vehicle driver.
The spare key programming switch state can be viewed by VIC PID SPARE_KY.
- Insert a programmed ignition key into the ignition lock cylinder and turn the ignition switch to RUN.
- Using the diagnostic tool service function card, select PCM from the menu. Follow SECURITY ACCESS to obtain security access. For additional information, see SECURITY ACCESS-PROCEDURE
.NOTE:
- The default setting on delivery of all new vehicles is < ENABLE>.
- From the diagnostic tool menu, select SPARE KEY PROGRAMMING SWITCH selection to desired setting:
- < ENABLE> Spare key programming procedure is accessible.
- < DISABLE> Spare key programming procedure is not accessible.