Test A: Flash Code 1 - No Dynamic Pull At Cruise Control Servo
WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition to LOCK position. Disconnect cruise control actuator cable from cruise control servo. Check cruise control actuator cable for sticking or binding. If cruise control actuator cable is okay, replace cruise control servo. See CRUISE CONTROL SERVO under REMOVAL & INSTALLATION. If cruise control actuator cable is not okay, replace cruise control actuator cable.