Door Glass Adjustment: Notes
- Adjust the clearance between the upper edge of the door glass and the ventilator glass weatherstrip.
- If vehicle has a convertible top, adjust the retainer. (See
RETAINER ADJUSTMENT
.)
Courtesy of MAZDA MOTORS CORP.
Courtesy of MAZDA MOTORS CORP.
- Adjust the convertible top. (See
TOP LOCK
.)
- Adjust the detachable hardtop. (See
TOP LOCK
.)
- Raise the door glass fully and adjust it so that there is no clearance with the retainer weatherstrip.
- Remove the retainer weatherstrip.
- Adjust the door glass vertically.
- Adjust the door glass forward/backward.
- Adjust the door glass inward/outward.
- Verify the door glass is in correct position when it is fully raised.
- Install the weatherstrip.
- Verify the door glass raises and lowers smoothly with the door closed.
NOTE:
- The front retainer installation hole is named retainer installation hole No. 1, and the bottom hole is named retainer installation hole No.8 (convertible top) or retainer installation hole No. 6 (detachable hardtop.)