LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege5 Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security System And Locks System >> Keyless Control Module Removal/Installation >> 4SD
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Keyless Control Module Removal/Installation: 4SD

  1. Disconnect the negative battery cable.
  2. Remove the rear package trim.
  3. Disconnect the keyless control module connector.
  4. Remove the nut and bolt to remove the keyless control module and the bracket as a module.
    Fig 1: Removing Keyless Control Module And Bracket
    G01915157Courtesy of MAZDA MOTORS CORP.
  5. Remove the screw.
  6. Push the stopper using a small driver, and remove the bracket.
    Fig 2: Pushing Stopper Using Small Driver
    G01915158Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals