Speed Control Switch

SPEED CONTROL SWITCH

REMOVAL AND INSTALLATION

1. Remove the steering wheel. For additional information, refer to STEERING WHEEL.

WARNING: When carrying a live air bag, make sure the bag and trim cover are pointed away from your body. In the unlikely event of an accidental deployment, the bag will then deploy with minimal chance of injury. Failure to follow these instructions may result in personal injury.




2. Remove the steering wheel cover.




3. Remove the steering wheel frame.
1. Remove the nuts.
2. Disconnect the ground wire.
3. Remove the steering wheel frame.




4. Disconnect the cruise control switches electrical connector.




5. Remove the cruise control switches.
1. Remove the screws.
2. Remove the cruise control switches.
6. To install, reverse the removal procedure.