LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> P/S Angle Sensor Inspection >> Sensor Output Value Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Output Value Inspection

  1. Turn the ignition switch off.
  2. Connect the WDS or equivalent to the DLC-2.
    Fig 1: Identifying Data Link Connector
    G00975789Courtesy of MAZDA MOTORS CORP.
  3. Select the following PIDs using the WDS or equivalent:
    • STEER_RATE (Steering wheel rotation rate)
  4. Turn the ignition switch to the ON position.
  5. Verify that the display of the WDS or equivalent shows the same value as the operation of the ***
scientia non olet · About LEMON Manuals