LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Locknut (on Adjusting Cover) Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Locknut (on Adjusting Cover) Assembly Note

CAUTION:
  • Be sure that the adjusting cover will not turn together with the locknut.
  1. Fix the adjusting cover and tighten the locknut.
    Fig 1: Tightening Locknut Using Special Service Tool
    G00975784Courtesy of MAZDA MOTORS CORP.
  2. Measure the pinion torque using the torque wrench.
    1. Standard Center of rack+/-90° 0.88-1.48 N.m {8.98-15.0 kgf.cm, 7.79-13.0 in.lbf} 
  3. If not as specified, remove the locknut and adjust the adjust cover.
    Fig 2: Measuring Pinion Torque Using Torque Wrench
    G00975785Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals