October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Coolant Temperature (ECT) Sensor Removal/Installation
- Remove the battery cover.
- Disconnect the negative battery cable.
- Remove the plug hole cover.
- Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT
.)
- Disconnect the ECT sensor connector.
- Remove the ECT sensor using the SST.
- Install in the reverse order of removal.
- Tightening torque 10-14 N.m {102-142 kgf.cm, 89-123 in.lbf}
Courtesy of MAZDA MOTORS CORP.