Blower Case Installation Note

If not replacing the blower case, replace the adhesive polyurethane on the fresh-air inlet of the blower case.
CAUTION:
- To adhere new polyurethane properly, be sure to remove the adhesive agent and adhesive polyurethane completely.
NOTE:
- If the blower case is removed, the adhesive polyurethane can be damaged. Damaged adhesive polyurethane could cause abnormal noise or other malfunctions, therefore replace it.
Fig 1: Replacing Adhesive Polyurethane On Fresh-Air Inlet Of Blower Case
Courtesy of MAZDA MOTORS CORP.
Insert the screw into the blower case and install the case to the A/C unit.

Fig 2: Installing Case To A/C Unit
Courtesy of MAZDA MOTORS CORP.