September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Air Mix Wire
- Set the temperature control dial at middle position (MAX HOT-MAX COLD).
CAUTION:
- If the air mix wire is set without first fixing the air mix link position, it is possible that the air mix door cannot be switched normally.
- Set the air mix sub link to the middle position (MAX HOT-MAX COLD) and insert an approx.
No. 5
Phillips screwdriver into the set hole to fix the position of the link.
- Connect the air mix wire to air mix link.
- Clamp the air mix wire to wire clamp.
- Remove the screwdriver and verify that the temperature control dial can move its full stroke.
Courtesy of MAZDA MOTORS CORP.