LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System >> Control System >> Climate Control Unit Wire Adjustment >> Airflow Mode Wire
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Airflow Mode Wire

  1. Set the airflow mode selector dial at defroster.
    CAUTION:
    • If the airflow mode wire is set without first fixing the airflow mode main link position, it is possible that the airflow mode door cannot be switched normally.
  2. Set the airflow mode main link to the vent position and insert an approx.  No. 5  Phillips screwdriver into the set hole to fix the position of the link.
  3. Connect the airflow mode wire to airflow mode main link.
  4. Clamp the airflow mode wire to wire clamp.
  5. Remove the screwdriver and verify that the airflow mode selector dial can move its full stroke.
    Fig 1: Setting Airflow Mode Main Link To Vent Position
    G00975618Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals