LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 6 i, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (L3) >> Clutch Switch Inspection >> Continuity Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Continuity Inspection: Notes

  1. Verify that the clutch switch is installed properly.
  2. Disconnect the negative battery cable.
  3. Remove the clutch switch.
  4. Inspect for continuity between the clutch switch terminals using an ohmmeter.
    • If the clutch switch is okay, but PID value is out of specification, perform the CIRCUIT OPEN/SHORT INSPECTION .
    • If not as specified, replace the clutch switch.
scientia non olet · About LEMON Manuals