LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (AJ) >> Intake Air Temperature (IAT) Sensor Inspection >> Resistance Inspection >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Resistance Inspection: Notes

  1. Disconnect the negative battery cable.
  2. Disconnect the MAF/IAT sensor connector.
  3. Measure the resistance between the MAF/IAT sensor terminals D and E using an ohmmeter.
    • If the IAT sensor is okay, but the PID value is out of specification, perform the "Circuit Open/Short Inspection".
    • If not as specified, replace the MAF/IAT sensor. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
Fig 1: IAT Sensor Connector Terminal Identification
G01026780Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals