LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> B4000 Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Troubleshooting (Security System And Locks System) >> DTC B1602: Invalid Key Code Format From Encoded Ignition Key Transponder (Partial Key Read)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B1602: Invalid Key Code Format From Encoded Ignition Key Transponder (Partial Key Read)

NOTE:
  • Large metallic objects, electronic devices on the key chain that can be used to purchase gasoline or similar items, or a second key on the same key ring as the PATS ignition key may cause vehicle starting problems and record DTCs under certain conditions. If a fault cannot be identified, examine the customer's key ring for such objects or devices. If present, inform the customer that they need to keep these objects from touching the PATS ignition key while starting the engine. These objects and devices cannot damage the PATS ignition key, but can cause a momentary concern if they are too close to the key during engine start. If a concern occurs, turn ignition OFF and restart the engine with all other objects on the key ring held away from the ignition key. Check to make sure the encoded ignition key used by the customer is a Mazda approved encoded ignition key (Mazda is the only approved encoded ignition key).
Fig 1: DTC B1602: Invalid Key Code Format From Encoded Ignition Key Transponder (Partial Key Read) Inspection Table (Steps 1-2)
G01935416Courtesy of MAZDA MOTORS CORP.
Fig 2: DTC B1602: Invalid Key Code Format From Encoded Ignition Key Transponder (Partial Key Read) Inspection Table (Step 3)
G01935417Courtesy of MAZDA MOTORS CORP.