October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Camshaft Position (CMP) Sensor Removal/Installation - 3.0L
- Disconnect negative battery cable.
- Disconnect the connector the camshaft position (CMP) sensor electrical connector.
Courtesy of MAZDA MOTORS CORP.
- Remove the screws and the CMP sensor.
Courtesy of MAZDA MOTORS CORP.
- Install in reverse order of removal.
- Tightening torque
- 2.5-3.5 N.m (26-36 kgf.cm, 23-30 in.lb)