LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> On-Board Diagnostic [Automatic Transmission] >> PID/Data Monitor Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PID/Data Monitor Inspection: Notes

  1. Connect the WDS or equivalent to the DLC-2.
  2. Turn the ignition switch to ON.
  3. Measure the PID value.
    NOTE:
    • Perform part inspection for the output device after TCM inspection.
    • The PID/DATA MONITOR function monitors the calculated value of the input/output signals in the TCM. Therefore, if a monitored value of an output device is out specification, it is necessary to inspect the monitored value of the input device related to the output device control. Since an output device, it is necessary to inspect the output device individually using the simulation function, etc.
scientia non olet · About LEMON Manuals