Detection Condition
WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
If PCM detects TP sensor No. 1 voltage at PCM 27-pin harness connector terminal "3M" is less than 0.2 volt after ignition is turned on, PCM determines TP circuit has a malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction conditions in first drive cycles. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available.