LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Mechanical [Intake-Air System] >> Intake-Air System Removal/Installation >> Notes
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Intake-Air System Removal/Installation: Notes

WARNING:
  • A hot engine and intake-air system can cause severe burns. Turn off the engine and wait until they are cool before removing the intake-air system.
  • Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite and cause serious injury or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure", while referring to the BEFORE REPAIR PROCEDURE .
  1. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT .)
  2. Remove in the order indicated. See Fig 1 .
  3. Install in the reverse order of removal.
    Fig 1: Removing/Installing Intake-Air System
    G01345699Courtesy of MAZDA MOTORS CORP.