LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Eccentric Shaft Position Sensor Inspection >> Resistance Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Inspection

  1. Disconnect the eccentric shaft position sensor connector.
  2. Measure the coil resistance between eccentric shaft position sensor terminals A and B.
    • If not within the specification, replace the eccentric shaft position sensor.
    • If the monitor item condition/specification (reference) is not within the specification, even though the eccentric shaft position sensor resistance is within the specification, perform the "CIRCUIT OPEN/SHORT INSPECTION " and repair or replace the malfunctioning part.

    Eccentric shaft position sensor resistance 

    1. 950-1,250 ohms (at room temperature) 
scientia non olet · About LEMON Manuals