October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Resistance Inspection: Notes
- Disconnect the ECT sensor connector.
- Remove the ECT sensor.
- Place the detection part of the ECT sensor in water and verify that the resistance between ECT sensor terminals A and B is as indicated in the table while gradually increasing water temperature.
ECT SENSOR RESISTANCE SPECIFICATION
| Water temperature (°C {°F}) |
Resistance (ohm) |
| 20 {68} |
2,205-2,695 |
| 80 {176} |
287-349 |
| 91 {196} |
227-240 |