LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 N >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic (Engine Control System 13BMSP] >> After Repair Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

After Repair Procedure

  1. Connect the WDS or equivalent to the DLC-2.
  2. Cycle the ignition switch off, then to the ON position (Engine off).
  3. Record DTC if retrieved.
  4. Clear all diagnostic data using the WDS or equivalent.
    Fig 1: Connecting WDS Or Equivalent To DLC-2 Connector
    G01345156Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals