Steering Lock Module: Removal

WARNING: This page is about a different car, the 2005 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Remove the ignition switch lock cylinder. See IGNITION SWITCH LOCK CYLINDER .

Fig 1: Removing Upper Steering Column Shroud

Courtesy of MAZDA MOTORS CORP.

Remove the upper steering column shroud.

Fig 2: Removing Lower Steering Column Shroud

Courtesy of MAZDA MOTORS CORP.

Remove the lower steering column shroud.
1. Remove the screws.
2. Remove the lower steering column shroud.
NOTE:
- Clean all metal shavings and debris after cutting slots in the steering lock module bolts.

Fig 3: Removing Shear-Off Bolts

Courtesy of MAZDA MOTORS CORP.

Cut slots into the heads of the shear-off bolts to remove.
- Discard the shear-off bolts.