October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Load compensation inspection
- Start the engine and idle it.
- Connect the WDS or equivalent to the DLC-2.
- Verify that P0506, P0507, or P0511 is not displayed.
- If P0506, P0507 or P0511 are displayed, perform DTC inspection. (See
DTC TABLE
.)
- Access the RPM PID.
NOTE:
- Excludes temporary idle speed drop just after the loads are turned on.
- Verify that the engine speed is within the specification under each load condition.
- If load condition is not as specified, inspect the following: