LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 6 V6-3.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Oscilloscope Patterns and Waveforms
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oscilloscope Patterns and Waveforms

Inspection Using An Oscilloscope (Reference)




Ignition coil control signals
- PCM terminals
- No.1 cylinders: 52 (+) - 26 (-)
- No.2 cylinders: 104 (+) - 26 (-)
- No.3 cylinders: 102 (+) - 26 (-)
- No.4 cylinders: 78 (+) - 26 (-)
- No.5 cylinders: 103 (+) - 26 (-)
- No.6 cylinders: 101 (+) - 26 (-)

- Oscilloscope setting
- 5 V/DIV (Y), 20 ms/DIV (X), DC range
- Vehicle condition
- Idle after warm up (no load)




Purge solenoid valve control signal
- PCM terminals
- 85(+) - 26(-)

- Oscilloscope setting
- 5 V/DIV (Y), 20 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load, during purge control)

CKP sensor signal




(+)
- PCM terminals
- 27(+) - 26(-)

- Oscilloscope setting
- 2 V/DIV (Y), 10 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)




(-)
- PCM terminals
- 1 (+) - 26 (-)
- Oscilloscope setting
- 5 V/DIV (Y), 5 ms/DIV (X), DC range
- Vehicle condition
- Idle after warm up (no load)




Generator output voltage signal
- PCM terminals
- 63(+) - 26(-)

- Oscilloscope setting
- 5V/DIV (Y), 5ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)




Fan control signal
- PCM terminals
- 69(+) - 26(-)

- Oscilloscope setting
- 2 V/DIV (Y), 0.2 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)




Field coil control signal
- PCM terminals
- 36(+) - 26(-)

- Oscilloscope setting
- 0.5 V/DIV (Y), 5 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)




TP signal
- PCM terminals
- 87(+) - 26(-)

- Oscilloscope setting
- 5 V/DIV (Y), 1 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)

CMP sensor signal




(+)
- PCM terminals
- CMP sensor (left bank): 80 (+) - 26 (-)
- CMP sensor (right bank): 28 (+) - 26 (-)

- Oscilloscope setting
- 1 V/DIV (Y), 20 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)




(-)
- PCM terminals
- CMP sensor (left bank): 54 (+) - 26 (-)
- CMP sensor (right bank): 2 (+) - 26 (-)

- Oscilloscope setting
- 1 V/DIV (Y), 20 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)




Fuel injection signals
- PCM terminals
- No.1:76(+) - 26(-)
- No.2: 50 (+) - 26 (-)
- No.3: 75 (+) - 26 (-)
- No.4: 49 (+) - 26 (-)
- No.5: 74 (+) - 26 (-)
- No.6: 48 (+) - 26 (-)

- Oscilloscope setting
- 5 V/DIV (Y), 10 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)




HO2S signal
- PCM terminals
- Front HO2S (right bank): 18 (+) - 26 (-)
- Front HO2S (left bank): 19 (+) - 26 (-)
- Rear HO2S (right bank): 44 (+) - 26 (-)
- Rear HO2S (left bank): 45 (+) - 26 (-)

- Oscilloscope setting
- 0.5 V/DIV (Y), 500 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)




HO2S heater control signal
- PCM terminals
- Front HO2S heater (right bank): 83 (+) - 26 (-)
- Front HO2S heater (left bank): 84 (+) - 26 (-)
- Rear HO2S heater (right bank): 57 (+) - 26 (-)
- Rear HO2S heater (left bank): 58 (+) - 26 (-)

- Oscilloscope setting
- 5 V/DIV (Y), 500 ms/DIV (X), DC range

- Vehicle condition
- Idle after warm up (no load)
scientia non olet · About LEMON Manuals