October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Abs Control Module Reprogramming
ABS CONTROL MODULE REPROGRAMMING
| PINPOINT TEST 1 |
UNABLE TO CONFIGURE THE NEW MODULE |
| STEP |
INSPECTION |
ACTION |
| 1 |
CHECK COMMUNICATION WITH THE MODULE IN QUESTION
- Key OFF.
- Connect WDS or equivalent tester.
- Key ON.
- Run a continuous self-test with the module in question.
- Are you able to communicate with the module in question?
|
Yes |
Go to step 2. |
| No |
See COMMUNICATIONS NETWORK DIAGNOSIS
. |
| 2 |
UPLOAD CONFIGURATION INFORMATION FROM OLD MODULE
- Key OFF, Install the old module
- Were you able to upload the old information from the old module?
|
Yes |
Go to step 3. |
| No |
Obtain as-built data for vehicle as necessary. Go to step 3. |
| 3 |
DOWNLOAD CONFIGURATION INFORMATION INTO THE NEW MODULE
- Key OFF.
- Install the new module.
NOTE:
- The WDS or equivalent tester will not retain the stored configuration information for longer than 24 hours.
- Download the stored information, or enter the as built data into the new module using the WDS or equivalent tester.
- Were you able to download the stored information into the new module?
|
Yes |
System OK. |
| No |
Install a new module. |