October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Mirror Does Not Function With Switch Logic
SYMPTOM TROUBLESHOOTING CHART - MIRROR DOES NOT FUNCTION WITH SWITCH LOGIC
| PINPOINT TEST 3 |
MIRROR DOES NOT FUNCTION WITH SWITCH LOGIC |
| STEP |
INSPECTION |
ACTION |
| 1 |
CHECK MIRROR MOVEMENT (LEFT/RIGHT)
- Operate the left and right power mirrors in the left and right directions.
- Do the mirrors move left and right?
|
Yes |
Go to step 2. |
| No |
Go to step 3. |
| 2 |
CHECK MIRROR MOVEMENT (UP/DOWN)
- Operate the left and right power mirrors in the up and down direction.
- Do the mirrors move up and down?
|
Yes |
System is OK. |
| No |
Go to step 5. |
| 3 |
CHECK THE VOLTAGE TO THE INOPERATIVE MIRROR
- Key OFF.
- Disconnect inoperative power mirror connector 0912-302 (left exterior rear view mirror) or 0912-303 (right exterior rear view mirror).
- Measure the voltage between inoperative right exterior rear view mirror connector 0912-303 pin 1 circuit DG, or left exterior rear view mirror connector 0912-302 pin 1 circuit R, wire and ground while operating the exterior rear view mirror switch.
- Is the voltage greater than 10 volts?
|
Yes |
Replace the exterior mirror motor in question. See OUTSIDE MIRROR REMOVAL/INSTALLATION
.
Test the system for normal operation. |
| No |
Go to step 4. |
| 4 |
CHECK THE POWER OUTSIDE MIRROR CONTROL
- Disconnect power exterior rear view mirror switch connector 0912-301.
- Check the power exterior rear view mirror switch. See POWER OUTSIDE MIRROR SWITCH INSPECTION
.
- Is the power outside mirror switch OK?
|
Yes |
Repair R wire and/or DG wire. Test the system for normal operation. |
| No |
Replace power outside mirror switch. See POWER OUTSIDE MIRROR SWITCH REMOVAL/INSTALLATION
.
Test the system for normal operation. |
| 5 |
CHECK THE VOLTAGE TO THE INOPERATIVE MIRROR
- Key OFF.
- Disconnect the inoperative power mirror connector 0912-302 (left exterior rear view mirror) or 0912-303 (right exterior rear view mirror).
- Measure the voltage between inoperative left exterior rear view mirror connector 0912-302 pin 2 circuit DL, or right exterior rear view mirror connector 0912-303 pin 2 circuit V, and ground while operating the exterior rear view mirror switch.
- Is the voltage greater than 10 volts?
|
Yes |
Replace the exterior rear view mirror motor in question.
See OUTSIDE MIRROR REMOVAL/INSTALLATION
.
Test the system for normal operation. |
| No |
Go to step 6. |
| 6 |
CHECK THE POWER OUTSIDE MIRROR CONTROL
|
Yes |
Repair DL wire and/or V wire. Test the system for normal operation. |
| No |
Replace the power outside mirror switch. See POWER OUTSIDE MIRROR SWITCH REMOVAL/INSTALLATION
.
Test the system for normal operation. |
|
|
|
|
|
|