LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> Tribute s, 4WD >> Repair and Diagnosis >> Engine Performance >> Symptom Troubleshooting [Engine Control System] >> Drive Cycle >> Monitor Repair Verification Drive Cycles >> Comprehensive Component Monitor Repair Verification Drive Cycle
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Comprehensive Component Monitor Repair Verification Drive Cycle

  1. Complete Vehicle Preparation.
  2. For M/T, accelerate from 0 to 80 km/h (0 to 50 mph). Continue to step 3. For A/T, from a stop and in overdrive, moderately accelerate to 80 km/h (50 mph) and cruise for at least 15 seconds. Stop vehicle and repeat without overdrive to 64 km/h (40 mph) cruising for at least 30 seconds. While at 64 km/h (40 mph), activate overdrive and accelerate to 80 km/h (50 mph) and cruise for at least 15 seconds. Stop for at least 20 seconds and repeat step 2 five times.
  3. From a stop, accelerate to 104 km/h (65 mph). Decelerate at closed throttle until 64 km/h (40 mph) (no brakes). Repeat this 3 times.
  4. Verify no DTCs are available with exception of P1000.
scientia non olet · About LEMON Manuals