LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> Tribute s, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Throttle Position (TP) Sensor - 2.3L >> Removal and Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

  1. Disconnect the negative battery cable. See BATTERY DISCONNECT .
  2. Disconnect the throttle position (TP) sensor electrical connector.
    Fig 1: Disconnecting Throttle Position (TP) Sensor Electrical Connector
    G03725016Courtesy of MAZDA MOTORS CORP.
  3. Remove the two screws and the TP sensor.
    Fig 2: Removing Screws, TP Sensor & Torque Specifications
    G03725017Courtesy of MAZDA MOTORS CORP.
    4. CAUTION:
    • Be sure to hand start the TP sensor screws. These are self-threading screws. Failure to hand start them can cause damage to the throttle body.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals